phone icon 910-251-9191

QuickPlumb project files saving moving.

Projects that you save to My Documents folder consist of one *.qpl file and a .bmp file for each of the plans you import into QuickPlumb. The *.bmp files will have the same name as the *.qpl file except that they will have a number from 0 to 5 appended to the end of the file name which represents the floor level that they belong to.
For example a file named “My Project” with 3 plans imported would consist of the following files:
My Project.qpl
My Project0.bmp
My Project1.bmp
My Project2.bmp
You can move these project files from one location to the other as long as you please all of them in the same folder.


There is no easier plumbing software on the market. With it’s ability to count each and every fitting so that you know the correct material quantities will be ordered and you will not be caught short of supplies the cost on the software will more than pay for itself. Think of how devastating it is when you arrive on the job site after the concrete has been poured only to find that there was an error in the layout and the plumbing stub-ups are in the wrong location!

Many of the challenges that arise in the business of plumbing contracting are overlooked by the majority of software vendors. Some of these include getting accurate coordinates for plumbing stub ups in slab construction. This is a critical element of any job because of the consequences of a pipe that is out of place and needs to be moved. The concrete will need to be cut and enough room will be needed to reroute the pipe to the correct location. This makes an unsightly mess on any jobsite and the general contractor is never happy when his freshly poured and finished concrete is in pieces. This is one of the main focuses of QuickPlumb software. Each fixture that is placed on the plan has plumbing stub up locations entered which follow it where ever it is placed on the plan. When you select View>Fixture Coordinates form the top menu bar dimension lines are extended to the reference lines that you can insert anywhere to represent such things as the edge of forms. Using these dimensions allows you to double check the stub up locations so that they are in the correct place. This along with the pipe cut list minimizes the possibility of mistakes during the slab phase of the plumbing project.

      Copyright by